Kart Axel - AMT s.r.l

GO KART

TUBES FOR AXLES

SOFT AXEL

EN 10305-2 cold drawn welded tube in E235 normalized + N in multiple lengths of 1,060 mm (between 4 and 6 multiples) +100 mm Ø 50.15 (-0 / + 0.15) X 2.1 mm
Ø 40.1 (-0 / + 0.15) X 3.2 mm
Ø 30.1 ( -0 / + 0.15) X 5.1 mm
Mechanical characteristics: Rm 350/400 N / mm2 – Minimum elongation 25%

EN 10305-2 cold drawn welded tube in E235 semi-hard + LC in multiple lengths of 1,060 mm (between 4 and 6 multiples) +100 mm. Ø 50.15 (-0 / + 0.15) X 2.10 mm </ span >
Mechanical characteristics: Rm 420/500 N / mm2 – Minimum elongation 12%

KART SEMI SOFT AXEL

KART MEDIUM AXEL

EN 10305-2 cold drawn welded tube in E235 + C in lengths multiples of 1.060 mm (between 4 and 6 multiples) +100 mm.
Ø 50.15 (-0 / + 0.15 ) X 2,1 mm
Ø 40,1 (- 0 / + 0.15) X 3.2 mm
Ø 30.1 (-0 / + 0.15) X 5.1 mm
Mechanical characteristics: Rm 490/600 N / mm2 – Minimum elongation 8%
Welded cold drawn tube EN 10305-2 in E355 normalized + N in multiples of 1,060 mm (between 4 and 6 multiples) + 100 mm.
Ø 50.15 (-0 / + 0.15 ) X 2.10 mm
Mechanical characteristics: Rm 510/610 N / mm2 – Minimum elongation 25%

EN 10305-2 cold drawn welded tube in E355 + C in multiple lengths of 1.060 mm (between 4 and 6 multiples) +100 mm.
Ø 50.15 (-0 / + 0.15) X 2.10 mm
Mechanical characteristics: Minimum Rm 640 N / mm2 – Minimum elongation 4%
Pipe cold drawn seamless EN 10305-1 in normalized 25CRMO4 + N in multiple lengths of 1.060 mm (between 4 and 6 multiples) +100 mm.
Ø 50.15 (-0 / + 0.15) X 2 , 10 mm
Mechanical characteristics: Rm 550/750 N / mm2 minimum – Minimum elongation 18%

HARD AXEL

SUPER HARD AXEL

Seamless cold drawn tube EN 10305-1 in 25CRMO4 stress relieved + SR in multiple lengths of 1060 mm (between 4 and 6 multiples) +100 mm
Ø 50.15 ( -0 / + 0.15) X 2.10 mm
Mechanical characteristics: Rm 800/930 N / mm2 minimum – Minimum elongation 14%

TUBES FOR KART FRAMES / FRAMES

Seamless cold drawn tube EN 10305-1 in 25CRMO4 normalized + N of length 5/7 mt .

Ø 25 X 2 mm

Ø 28 X 2 mm

Ø 30 X 2 mm

Ø 32 X 2 mm

Ø 40 X 2 mm

Ø 50 X 2 mm

Mechanical characteristics: Rm 550/750 N / mm2 minimum – Allun minimum 18%

Ø 28 X 2 mm

Ø 30 X 1,5 mm

Ø 30 X 1.8 mm </ p >

Ø 30 X 2 mm

Ø 32 X 2 mm

Ø 50 X 2 mm

Mechanical characteristics: Minimum Rm 800/930 N / mm2 – Minimum elongation 14%